Linksys Velop is a well-known mesh Wifi system that is easy to operate has strong performance and provides seamless connectivity. However as with any technology your Linksys Velop system may need to be reset at some point. Knowing how to properly reset your Velop nodes is vital whether troubleshooting connectivity issues altering your network setup or simply starting again. This detailed guide will follow you through the steps for How To Reset Linksys Velop ensuring you have all the information you need to get your network up and running again.
Understanding Linksys Velop Resets
Before beginning the reset process it’s vital to distinguish between a soft reset and a hard reset:
- Soft Reset (restart): This includes rebooting the Velop node without deleting any configurations or settings. It is useful for small difficulties such as deprived performance or sporadic connectivity.
- Hard Reset (Factory Reset): This clears all settings and configurations resetting the Velop node to its factory defaults. Use this option if you’re having serious problems or want to start over with your network.
How To Reset Linksys Velop – Soft Reset
A soft reset can frequently cure minor connectivity issues eliminating the need for more radical solutions. Here’s how to reset Linksys Velop node:
- Locate the Reset Button: There is a reset button at the bottom of each Velop node. It is normally recessed to avoid inadvertent pressing.
- Push and hold the reset knob. Hold down the switch. You’ll notice the light on the node blink signifying that the reset procedure has commenced.
- Leave the Switch: After holding the knob for the desired time let go. When the node reboots the light turns solid white indicating that it is ready to be use again.
This procedure does not destroy any of your settings or network configurations making it a quick and easy solution to troubleshoot small difficulties.
How To Reset Linksys Velop – Hard Reset
A hard reset is more thorough and should be done if you’re having persistent problems or need to restore the network to its factory settings. This is how to reset Linksys Velop:
Method #1: Consuming the physical reset knob.
- Locate the Reset Button: Again, locate the reset knob at the lowermost of your Velop node.
- Hold down the knob: Hold down the knob of reset. You’ll notice the light on the node begin to blink red.
- Wait for the Light to Change: Continue holding the button until the light changes from red to a blinking white light. This means that the node is resetting.
- Release the Button: When the light begins to flicker white release the reset button. The node will reset and restore to its factory settings. When the light goes solid white, the node is ready to be setup again.
Method 2: Use the Linksys App
- Open the Linksys app: Make sure your smartphone is linked to your Velop network and launch the Linksys app.
- Access the menu: To access the menu tap the menu icon (typically three horizontal lines) in the app’s top left corner.
- Navigate to Network settings: Choose Network Administration or Network Settings depending on the app version.
- Select the node to reset: Select the node you wish to reset from the list of connected nodes.
- Perform the reset: Tap on “Reset Node” or “Factory Reset” to confirm your selection. The program will walk you through the procedure and the node will be reset to factory defaults.
How To Reconfigure Linksys Velop After Reset Process
After executing a hard reset you will need to reconfigure your Linksys Velop network again. Here’s a quick summary of the stages involved:
- Connect the Primary Node: Plug the primary Velop node into your modem via Ethernet cable and turn it on.
- Install the Linksys App: If you haven’t already transfer and fix the app on your smartphone.
- Follow the Linksys velop setup instructions. Open the app and trail the steps to configure your primary node. This will entail assigning a new Wifi network name and password.
- Add More Nodes: Once the primary node is establish and you can add more nodes to grow your network. Place them strategically throughout your home and use the app to finish the Linksys velop login.
- Configure Settings: Adjust your network settings as needed.
Troubleshooting Tips
If you face troubles during the reset process or setup here are a few suggestions:
- Check Connections: Make sure all wires are securely connected and your modem is working properly.
- Update Firmware: be certain that your Velop nodes are running the topical firmware. You can check for apprises using the app.
- Reset Again: If the problem persists consider performing another hard reset.
Conclusion
Resetting your Linksys Velop mesh Wifi system can help you fix connectivity issues and get a new start when necessary. Whether you choose a soft reset or a hard reset the process is simple and can be completed in minutes. By following this complete guide you’ll be prepared to deal with any network issues and maintain a pleasant WiFi experience.